|
|
1 Filter housing 20 microns completely assembled (
w/o boost pump ) or
2 filter housings 5 and 20 microns ( with optional boost pump ) |
| 1 316 Bracket with screws. |
| 1 5/8" Service valve with 1 nylon nipple and 2 barbed
hose connectors (with boost pump) or |
1 3/4" flush/storage valve with 1 Nylon nipple and 3
barbed hose connectors (without boost pump)
|
| |
1 High pressure pump unit with 316Ti SS pump head
and electric motor, 2HP, 50 or 60Hz completely assembled with all fittings.
|
| |
Pressure vessel(s) with reverse osmosis membrane(s)
|
| 500-AML-1 |
one |
|
|
| 900-AML-2 |
two |
40" vessels |
|
| 1200-AML-3 |
three |
40" vessels |
|
1500-AML-4
|
four
|
40" vessels
|
|
|
1 316 Stainless steel control panel completely assembled
with |
| 1 316Ti Self regulating pressure control valve |
| 1 High pressure gauge |
| 1 Product flow meter (25/50/100gph) |
| 1 Diverter (3-way) valve |
| 1 Breaker (20amp /230V or 30amp / 115V) or |
2 Breakers (like above and 5 amp with optional boost pump)
|
| |
| 15 feet / 4.5 meter high pressure hose with 2 x 316 high
pressure fittings attached |
| 2 x 316 field attachable high pressure fittings |
|
| 20 feet / 6 meter 3/8" blue product water tubing or 1/2" braided hose (model 1500) |
| 10 feet/3 meter 3/4" wire coil reinforced intake hose
(without boost pump only) |
| 10 feet/3 meter 5/8" braided hose + 3 feet wire coil
reinforced intake hose ( with boost pump) |
| 10 feet/3 meter 1/2" braided reject hose |
|
| 2 x 1/2" 316 hose clamps (model 500, 900, 1200) or |
| 6 x 1/2" 316 hose clamps (model 1500) |
| 6 x 3/4" and 2 x 5/8" 316 hose clamps (with boost pump) or |
| 8 x 3/4" 316 hose clamps (without boost pump) |
|
| 1 Handheld TDS Meter |
| 2 Filter cartridges, 20 microns (without boost pump) or 5 and
20 microns (with boost pump) |
|
1 Biocide, 1 acid cleaning solution, 1 alkaline cleaning
solution
1 complete Installation and Operating Manual
|
