Specifications, System Features and Prices:
Model
|
Production
gallons/hr. -day
|
Production
liters/hr. -day
|
Recovery
|
Pressure
Vessel
|
Raw Water Flow
|
Prices ₤
Semi Modular System
(intermittent duty)
|
Prices ₤
Vertical System
(continuous duty)
|
| 500 - PRO - 1 |
20 - 480 |
75 - 1810 |
10% |
1 x 40 " |
3.6 gal/min |
₤ 3,475 |
N/A |
| 900 - PRO - 2 |
38 - 912 |
143 - 3450 |
18% |
2 x 40 " |
3.6 gal/min |
₤ 3,885 |
₤ 4,030 * |
| 1200 - PRO - 3 |
50 - 1200 |
190 - 4540 |
23% |
3 x 40 " |
3.6 gal/min |
₤ 4,450 |
₤ 4,595 * |
| 1500 - PRO - 4 |
60 - 1500 |
227 - 5670 |
28% |
4 x 40 " |
3.6 gal/min |
N/A* |
₤ 4,990 * |
* For installations where space is limited, the high pressure pump, the flow/electrical control unit, the pressure vessel rack and the pre-filters of the vertical mount system can be ordered in separate modules at no extra charge (see dimensions below).
PRO Semi-Modular Systems with compact 21” membrane racks
Model
|
Production
gallons/hr. -day
|
Production
liters/hr. -day
|
Recovery
|
Pressure
Vessel
|
Raw Water Flow
|
Prices US$
Semi Modular System
(intermittent duty)
|
Prices US$
Vertical System
(continuous duty)
|
| 600 - PRO - 3 |
28 - 672 |
106 - 2540 |
13% |
3 x 21 " |
3.6 gal/min |
₤ 3,475 |
N/A |
| 800 - PRO - 4 |
36 - 864 |
136 - 3270 |
17% |
4 x 21 " |
3.6 gal/min |
₤ 3,885 |
N/A |
Reverse Osmosis performance varies with the feed water temperature and salinity. The rated performance is tested at 26°C / 80°F water temperature and a salinity of 35000 ppm TDS.
Options and Accessories
| |
Semi Modular Bulkhead Mount System
(with optional seawater supply pump) |
|
|
Vertical Mount System
|
|
 |
Self contained or semi modular concept for space saving, fast and easy self installation |
| |
|
 |
All control systems are electro-mechanical – No electronic circuits close to seawater |
| |
|
 |
Spring loaded automatic 316Ti pressure regulator – No leaking needle valves |
| |
|
 |
High pressure hoses with O-ring sealed 316Ti fittings – No corroding or cracking compression fittings |
| |
|
 |
RO pressure vessels with O-ring sealed 316Ti high pressure fittings - No cracking NPT end plugs |
| |
|
 |
Corrosion resistant marine aluminum frame, epoxy primed and polyurethane top coated |
| |
|
 |
Widely available commercial size sediment pre-filters (10”x 4.5”, Big Blue) are standard equipment |
| |
|
 |
Custom system configuration for tight installations at no extra charge |
| |
|
 |
Five years limited warranty on the 316Ti high pressure pump |
| |
|
 |
No proprietary equipment - consumables may be obtained anywhere |
Electrical Power Requirements:
| Bulkhead Mount System (2HP Motor): |
115/230V 60Hz - 230V 50Hz single phase 9.2 amps at 230V |
|
|
| Vertical Mount System (3HP Motor): |
115/230V 60Hz - 230V 50Hz single phase 11.2 amps at 230V |
|
208 - 230/460V 60Hz three phase 5.5 amps at 220V |
| |
220/380/440V 50Hz three phase 3.8 amps at 380V |
Instruments:
The desalination system is equipped with all necessary instrumentation, for the control and supervision
of the operation of the unit.
The instrumentation includes:
| Pressure Gauges: |
|
Feed water, system entrance (316SS glycerin filled) |
| |
|
Feed water, high pressure pump entrance (316SS glycerin filled) |
| |
|
RO pressure, (316SS glycerin filled) |
| |
|
|
| Flow Meter: |
|
Product discharge |
| Conductivity: |
|
Digital product water quality monitor - ppm TDS |
The following automatic emergency shut off functions are provided:
Low feed water pressure (e.g. seawater intake or pre-filters clogged)
High RO pressure
Tank full (float switch optional)
Dimensions:
| |
|
|
|
|
|
|
| Bulkhead Mount System:
|
|
|
Inches |
|
|
Centimeters |
|
|
|
|
|
|
|
| Pump / Control Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pressure vessel - 500-PRO-1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pressure vessel - 600-PRO-3 |
|
|
|
L |
x |
4" |
D |
x |
13" |
|
|
|
|
W |
x |
10cm |
D |
x |
33cm |
|
| Pressure vessel - 800-PRO-4 |
|
|
|
L |
x |
4" |
D |
x |
15" |
|
|
|
72cm |
L |
x |
10cm |
W |
x |
48cm |
|
| Pressure vessels - 900-PRO-2 |
|
|
|
L |
x |
4" |
D |
x |
9.5" |
|
|
|
|
L |
x |
10cm |
D |
x |
24cm |
|
| Pressure vessels - 1200-PRO-3 |
|
|
|
L |
x |
4" |
D |
x |
13" |
|
|
|
123cm |
L |
x |
10cm |
D |
x |
33cm |
|
| Pre-filtration System |
|
|
|
W |
x |
8" |
D |
x |
15" |
|
|
|
|
W |
x |
20cm |
D |
x |
38cm |
|
| Seawater Boost Pump |
|
|
|
L |
x |
8" |
W |
x |
8" |
|
|
|
36cm |
L |
x |
20cm |
W |
x |
20cm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| For installations where space is limited, the high pressure pump and the flow/electrical control unit can also be ordered in separate modules. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Vertical Mount System: |
|
|
|
H |
x |
27.5" |
W |
x |
18" |
|
|
|
|
H |
x |
70cm |
W |
x |
46cm |
|
| Seawater Boost Pump |
|
|
|
L |
x |
8" |
W |
x |
8" |
|
|
|
|
L |
x |
20cm |
W |
x |
20cm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For installations where space is limited, the high pressure pump, the flow/electrical control unit, the pressure vessels and the pre-filters of the vertical mount system can be ordered in separate modules.
Size of the high pressure pump module: 25” x 12” x 12” - 64cm x 31cm x 31cm.
All other components same as Bulkhead Mount System.
|
|
|