 |
Boost pump - ₤ 98.50
submersible (5/8" intake
hose barb, 1/2" outlet hose barb, 4 feet / 1.2 meter 5/8" wire
reinforced intake hose, 10 feet / 3 meter 1/2" braided feed
hose)
If the high pressure pump is installed less than 2 feet below the waterline
or an additional 5 micron pre-filter is added, the installation of an optional
boost pump is recommended.
|
|
|
Fresh water flush kit - ₤ 67
(
filter housing, active carbon cartridge, 316 SS bracket,
8 screws, shut off valve, 2 hose barb connectors, Nylon tee,
10 ft braided hose, 316SS hose
clamps )
The fresh water flush kit enables you to store your watermaker
for up to 10 days
without the use of chemicals (biocide).
The fresh water flush storage can be repeated every 10 days.
|
|
.jpg)
|
Low pressure gauge
- ₤45
The low pressure gauge indicates when the pre-filters have to be changed.
|
|
|
5 Micron Pre-filter housing
(1 filter housing, 1 pre-filter cartridge, 1 bracket, 1 3/4" NPT
nipple).
Free of charge: An additional 5 micron pre-filter is only recommended
in
connection
with the optional boost pump
|
|
| |
Maintenance Kit - ₤ 75
10 Pre-filters, 5 and/or 20 micron (2 ½” x 10”)
1 Spare sea strainer screen
2 Active carbon filters (fresh water flush)
1 Ltr. High-pressure pump oil |
|
| |
Extended
Maintenance Kit - ₤ 64
2 DC motor brushes
1 Acid cleaning compound
1 Alkaline cleaning compound
2 Storage compounds (Biocide)
1 Complete spare seal and O ring kit (except high pressure pump) |
|
|
